Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Cherry Creek?
Garage door work in Cherry Creek typically costs $150 to $600, and most jobs land in that range. A simple spring replacement runs $180 to $340 for one spring, while a new door installation runs $700 to $2200 for the door itself. What you’ll actually pay depends on the part, the brand of system on your door, and whether we’re fixing something small or replacing a door that’s reached the end of its life.
We give free estimates, response is fast, and pricing is upfront, so you know the number before any work starts. The written estimate sets the final price. Call (844) 621-5482 and we’ll talk through your door.
Key Takeaways
- Typical repair range in Cherry Creek: $150 to $600.
- Most common call: a broken spring, at $180 to $340 for one spring.
- New door installation: $700 to $2200 for the door, plus opener if you need one.
- Parts availability: we supply components directly, which cuts the wait from manufacturer back-orders and big-box guesswork.
- Free estimates and upfront pricing before work begins.
Garage Door Cost Breakdown (2026)
Here’s what each type of job typically runs in Cherry Creek. These are estimated ranges, not a quote. Every door is different, and your written estimate is the number that counts.
| Job | Typical Estimated Range |
|---|---|
| Garage door repair (general) | $150 – $600 |
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2200 |
One note on springs: a matched pair is almost always replaced together, so a pair costs about twice the single-spring range. When one spring fails on a two-spring door, the other is usually at the same wear point, and leaving it in place means a second service call not far down the road. We’ll tell you which situation you’re in before any work starts.
What pushes a job up or down the range? It comes down to a few things. A heavy double door carries more tension and takes longer on the spring job than a light single door. A panel that’s a common size in a standard color is cheaper to replace than a discontinued style that has to be sourced. Opener work on a newer belt-drive system runs differently from a chain-drive or a screw-drive. And a full install costs more than a repair by a wide margin. If your door is simply old and tired, it’s worth asking whether repair or replacement makes more financial sense, and our garage door repair Cherry Creek team can go through both options with you.
What Affects Garage Door Pricing in Cherry Creek
- Door size and type. A single-car door has fewer panels, less surface, and less weight than a double-car door. That shows up in the price of panels, springs, and openers.
- Brand and model. We work on eight major brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. A part for a common LiftMaster opener is easy to match. A door built around a specific Clopay or Amarr panel profile takes a little more sourcing, and we handle that directly rather than sending you off to track it down.
- What actually failed. A broken roller at $110 to $220 is a quick, low-cost job. A cable that’s snapped at $130 to $250 sits in the middle. A spring failure at $180 to $340 is the most common call. Knowing which one you’re facing keeps the estimate honest.
- Whether the system needs a matched part. Springs, cables, and rollers work as a set. Replacing one spring on a two-spring door is cheaper than replacing the pair, but the pair is usually the right call if both are worn.
- Opener condition. Opener repair at $120 to $320 versus opener installation at $250 to $550 is a real choice, and it comes down to whether the motor and logic board are sound. On an older Genie or Craftsman that’s simply worn out, a new opener may be the better spend.
- Access and height. A low-clearance ceiling, a door mounted close to the framing, or an especially heavy custom door all add time and care to the job.
We’re a garage door specialist, not a general handyman who also does doors. Every technician works on garage doors all day, every day, so diagnosing your issue takes less time and less guessing. Brand familiarity matters here. If you tell us you have a Chamberlain opener with a Raynor door, we already know how that combination should sound, cycle, and reverse. Call (844) 621-5482 to set up a free estimate.
When Repair Makes More Sense Than Replacement
A repair is the right call in most cases. If the door itself is structurally sound and the failure is a spring, cable, roller, or opener part, replacing the whole door is unnecessary spending. Damaged hardware comes off, the door stays.
A new door starts to make sense when the trouble is the door itself. That means cracked or bent panels, a frame that’s pulling away from the opening, or a style so old that parts are discontinued. It also makes sense when a door is failing repeatedly, where you’re paying for repairs more often than you’d like. New installation at $700 to $2200 is a real number, and it’s worth comparing against the cost of chasing one fix after another. We’ll tell you honestly which side of the line your door is on. For a repair-focused look at what brings us out, see our garage door repair Cherry Creek page.
How Much Does Spring Repair Cost in Cherry Creek?
Spring repair in Cherry Creek costs $180 to $340 for one spring, and most homes with a two-spring setup will replace both for about twice that. This is the single most common job we handle and the one we want you to leave to a trained technician. High-tension springs store an enormous amount of force, and they can cause serious injury if handled incorrectly. Please don’t try to adjust or replace a spring yourself. Call (844) 621-5482 and we’ll get it handled safely.
We carry the spring stock to match most common door weights and configurations, so there’s less waiting around for a part. Our technicians have up to 12 years of experience, and spring work is a core part of what they do. For a closer look at this job specifically, see our garage door repair Cherry Creek service information.
How Much Does Opener Repair or Installation Cost in Cherry Creek?
Opener repair runs $120 to $320, while a full opener installation runs $250 to $550. Repair usually covers a failed motor, a bad logic board, a stripped gear, or a remote or wall control that’s stopped responding. Installation means a new unit, mounting hardware, and setup on the rails and safety reversal.
We’re familiar with LiftMaster, Chamberlain, Genie, Craftsman, and Raynor openers specifically, so if you’ve got a model that’s giving you trouble, tell us the make and you’ll get a straight answer rather than a guess. On an older opener where the motor and board are both aging, we’ll lay out the repair cost against an install so you can decide. Call (844) 621-5482 for a free estimate.
Panel Replacement and Cosmetic Repairs
Panel replacement in Cherry Creek runs $250 to $500. A single dented or creased panel can be swapped without touching the rest of the door, which saves you from a bill for a whole new door. Common reasons for a panel call: a car bumper, a backed-out vehicle, storm damage, or a door that was closed on something in its path. Panel work depends heavily on matching the profile and color of the existing door. We source parts directly, so you’re not stuck waiting on a manufacturer back-order or trying to match a panel yourself at a big-box store.
How to Save on Garage Door Work
Some straightforward ways to keep the bill down, in order of impact:
- Fix the small thing before it becomes the big thing. A worn roller at $110 to $220 is cheap. Ignored, that roller can wear the track, and then you’re looking at a track realignment at $120 to $240 on top.
- Address both springs together on a two-spring door. One spring at $180 to $340 seems cheaper than the pair, but a second failure a few months out means a second service visit. Replacing the matched pair in one job usually works out ahead.
- Repair the opener before you replace it. A repair at $120 to $320 is often all a working motor needs. Ask for the honest comparison against a $250 to $550 install.
- Get the estimate in writing. Our free estimate spells out the parts and labor, so there are no surprises halfway through the job. Call (844) 621-5482 to set one up.
- Ask about part availability. When we supply the part directly, you skip the waiting and the markup that comes with sourcing it yourself.
Free estimates are the simplest way to know where you stand. There’s no charge to look, diagnose, and put a number in front of you.
What Does a Full Garage Door Installation Cost in Cherry Creek?
A new garage door installation runs $700 to $2200 for the door and the hardware that goes with it, and that’s a general range across the standard styles. Opener installation is separate, at $250 to $550 if you’re adding or replacing one, and many installations include a new opener since it’s the natural time to do both.
The range depends on door size, material, insulation, and the window and panel style you choose. A basic steel single door sits near the low end. An insulated double door with windows or a custom finish sits near the top. We work on doors from Clopay, Amarr, Wayne Dalton, and Raynor, so we can help you match a new door to what your home already has. Installation is one of our core services, along with repair, opener repair, spring repair, and parts supply. Call (844) 621-5482 for a free estimate on your project.
Do You Charge for Estimates?
No. Our estimates are free. We’ll come out, look at the door and the opener, and give you a written range that covers the parts and labor. There’s no charge to get the number, and no obligation to move forward. That pricing is backed by a satisfaction guarantee: if the work isn’t right, we come back and make it right. Call (844) 621-5482 to schedule a free estimate.
Why Brand Matters for Your Cherry Creek Garage Door
Knowing the brand of your door and opener before anyone arrives saves time and prevents misdiagnosis. We’re factory-familiar with eight major brands, which means our technicians know the quirks of each system rather than running generic repair steps on every job. A LiftMaster logic board doesn’t behave the same as a Genie’s. A Chamberlain remote and wall control don’t pair the same way. A Clopay panel profile doesn’t match an Amarr one. When you call and tell us what you’ve got, we already know what to check. That extends across repair, opener repair, spring repair, parts supply, and installation. Call (844) 621-5482 for a free estimate on any of it.
FAQs – Garage Door Cost
How much does garage door repair cost in Cherry Creek?
Garage door repair in Cherry Creek typically costs $150 to $600, depending on what failed. A roller replacement at $110 to $220 sits at the low end, and a spring repair at $180 to $340 is the most common job. Call (844) 621-5482 for an exact quote. Estimates are free.
How much does spring repair cost in Cherry Creek?
Spring repair runs $180 to $340 for one spring. If your door has two springs and both are worn, the matched pair is usually replaced together, which puts the job at about twice that range. Call (844) 621-5482 for an exact quote. Estimates are free.
Is it cheaper to repair or replace my garage door?
Repair is cheaper in most cases. A repair runs $150 to $600, while a new installation runs $700 to $2200. Repair wins whenever the door itself is sound and only the hardware has failed. Replacement makes more sense when the panels are cracked or bent, the frame is pulling away, or the door keeps failing. Call (844) 621-5482 and we’ll give you an honest comparison. Estimates are free.
Can you fix my garage door the same day?
Often, yes. Many repairs, including springs, rollers, and openers, are same-day jobs when the right part is on hand, and we supply parts directly to cut the wait. Our response is fast and dispatch runs from 7am to 7pm. Call (844) 621-5482 and we’ll tell you what’s available for your door.
How much does a new garage door cost in Cherry Creek?
A new door installation runs $700 to $2200 for the door and its hardware. Add $250 to $550 if you’re installing a new opener at the same time. The range depends on size, material, and style. Call (844) 621-5482 for a free estimate on your door.
Pricing reflects the Cherry Creek market as of 2026. Garage Door Repair Cherry Creek offers free estimates – call (844) 621-5482.
What Our Customers Say
"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Craig Vaughn"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Omar Hassan"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Jodi Brooks